Open-loop today
Fixed recipes can't respond when materials, temperature, or cell quality drift mid-shift.
Lamination & cure · Panevex agent
Lamira
Models encapsulant cure kinetics and controls lamination temperature, vacuum, pressure, and dwell in closed loop per material lot and stack-up — predicting cure state and gel content before the module exits the press.
Encapsulation cure controlwhat it does
Jetson Orin + OVXruns on
Closed-loopcontrol mode
Lamira — Cured right the first time — no delamination, bubbles, or cell shift.
The problem it solves
Why lamination & cure breaks without autonomy
Invisible failure
The defects that matter most are the ones no operator can see at line speed.
Lost watts & yield
Every uncorrected drift ships as lost power, rework, or a field-degradation liability.
How Lamira works
Models encapsulant cure kinetics and controls lamination temperature, vacuum, pressure, and dwell in closed loop per material lot and stack-up — predicting cure state and gel content before the module exits the press.
- Perceives its station in real time with fused sensing.
- Predicts the physical outcome before the module moves on.
- Controls the machine in closed loop, within human-set guardrails.
- Writes every outcome back to the shared module twin.
Capabilities
What Lamira delivers
Real-time perception
Station-specific sensing tuned for lamination & cure.
Closed-loop control
Set-points corrected on the machine with bounded latency.
Auditable actions
Every decision stores the evidence that justified it.
Yield analytics
Root-cause traces from outcome back to this station.
MES integration
Fits your existing PLCs, SCADA, and MES.
Edge-native
Runs on Jetson Orin + OVX for deterministic performance.
| Attribute | Detail |
|---|---|
| Station | Lamination & cure |
| Primary function | Encapsulation cure control |
| Runs on | Jetson Orin + OVX |
| Control mode | Closed-loop, guardrailed |
| Data written to | Twinvex module digital twin |
| Integrates with | MES · SCADA · equipment PLCs |
99.4%
Perception recall
<10 ms
Edge decision latency
24/7
Autonomous operation
3.2 W
Contributes to recovered power
In the loop
Where Lamira sits in the flywheel
One agent, one shared brain
Lamira doesn't work in isolation. It reads from and writes to the same module twin as every other agent, so its improvements compound across the whole line.
- Shares the module digital twin
- Learns from every run on every line
- Policy transfers across fabs
“Lamira turned our lamination & cure station from a source of escapes into our most predictable process. It just runs.”
LAProcess EngineerTier-1 module manufacturer
The rest of the stack
Better together
String & interconnectRibbix
Sound, low-loss bonds without cracks or cold joints.
Explore EL & defect sensingElumnexSee inside every cell — predict microcracks before they cost you watts.
Explore Binning & matchingBinovaCell binning and power-class matching that recovers every watt.
Explore Module digital twinTwinvexHit target power-class and yield before the physical run.
ExploreDo we need the whole Panevex platform to run Lamira?
No. Lamira can deploy standalone on its station and still delivers value — though it gets stronger as more agents share the twin.
Will it work with our existing machines?
Yes. Lamira augments your current equipment through standard PLC, SCADA, and MES interfaces — no rip-and-replace.
How is the autonomy kept safe?
Every actuator has human-set guardrails. Low-confidence decisions hold within safe bounds and escalate with evidence.
See Lamira on your line
Book a walkthrough and we'll show Lamira running against your real lamination & cure data.